[Home]   

B4C - Phase 3

1996 Camaro B4C -  Phase 3 - Getting Ready to Race!

 Click to enlarge any photo

Next Page >>

 

Sound System

Audiobahn Dual 10" Subs in quality enclosure

Interior prior to seat install

Note gauges installed, Uniden scanner (recommended as a safety feature for Open Road Racing). Small switch below cig lighter is a 2 position manual fan overide switch with LED indicators. Scanner speaker is installed in the old cd holder area in the forward console. behind the speaker is an 8 circuit fuse block which is supplied directly from the battery. It was very helpful when it came time to power up all these accessories.

Heavy Duty Battery Cables

These cables are 2x the thickness of OEM cables. Note the 2 relays directly begind the PS reservoir. These relays supply the power to the aux fuse block in the cabin.

Battery Cables connected

The cables were so heavy and stiff that it was quite a chore to install them.

Cabin Detail

Oil, Trans and Diff Temp Gauges. Pioneer PE77DH Garmin GPSV with direct power connection and external amplifying antenna.

Kirkey Seat

Kirkey Intermediate Road Race Seat minus the seat pad.

A 20" seat was installed on the driver's side; 16" on passengers side.

Fabrication of seat brackets

NO SLIDERS! This is the fabrication of the drivers side seat bracket. Adjustment is possible fore and aft by unbolting the seat brackets which takes only 10 minutes.

Driver side seat brackets

Grade 8 bolts used throughout.

Driver side seat brackets - rear view

Driver side seat brackets - rear view

Driver side seat brackets - front view

Preliminary fitting of seat

Seat is in full rear position and comes within 4" of horizontal roll bar brace

Rearof drivers seat

Look closely to see Ioport seat brace attached to roll bar horizontal cross member

Seat installed - side view

adjustable for front/back tilt

Driver seat installed

The upper wing on the seat comes within 2" of the door panel when door is closed

Passenger seat

Hard mounted and not adjustable. it is connected to the roll bar horizontal brace with a custom non-adjustable upper bracket.

Interior View

Rearof Driver's Seat

Interior view - Roll bar padding installed

Interior view - Roll bar padding installed

Next Page >>



 

Home • Up • B4C - Phase 1 • B4C - Phase 2 • B4C - Phase 3 • B4C - Phase 4

 

 


 

 
Google
 
Web www.TexasInterceptors.com